Leica Geosystems

Leica Lino L2P5-1 Self-Levelling All-in-one Cross-Line And 4 Points Laser Red Beam

MPN#: 864431
Click to enlarge
Leica Geosystems

Description

Leica All-in-one Cross-Line And Points Laser Universal Applicattons Ideal for alignment tasks such as drywalling, tiling, partitioning and electrical installations as well as plumb point projection, setting out or transferring measured points.  
  • Multi-purpose Laser with Crossline, plumb-points and points for 90° stake-out
  • High visibility due to red Ultra-power laser diodes
  • Large working range due to very wide fan angles
  • Self-levelling over wide range
  • Operating range of up to 25 m
  • With Li-Ion power up to 44 h operation time
  • Uninterrupted working with Triple-Power concept
  • Smart magnetic adapters for easy positioning
  • Can be used with RGR 200 Laser receiver for extended range
More Product DetailsWhat's Included

$429.95

: $465.00

Compare
Add to wishlist
Add to quote
free shipping
Ships Out within: 24-48 Hours
Overview

CROSS LINE AND POINT LASER
The Leica Lino L2P5 is a a self-levelling cross-line and point laser. This Lino is ideal for alignment tasks such as tiling, drywalling, partitioning and electrical installations as well as plumb point projection, setting out or transferring measured points.
WORKING RANGE
Leica optics enable the Lino L2P5 to project very bright and clearly visible laser lines and dots. Depending on the lighting conditions, the working range is up to 25 meters. This range can be easily extended up to 80 meters by using the laser receiver.
MAGNETIC POSITIONING
This two-in-one laser level has magnetic adapters which allow you to position the instrument quickly and with absolute precision. You can easily attach it within U-profiles, to edges, or any magnetic surfaces.
SELF-LEVELLING
The Leica Lino L2P5 is a self-levelling cross and line laser. This means it automatically adjusts its positioning up to ± 4° when slightly out of level without any manual alignment.
CONTINUOUS POWER
Your Leica Lino L2P5 laser has a triple power concept. It runs with Li-Ion batteries for up to 44 hours on one charge. It can also be powered by alkaline batteries or its charger.
RUGGED DESIGN
The Leica Lino L2P5 is designed and built to support today’s jobsite conditions. It is dust and spray water protected to IP 54 standards.
VISIBILITY
High visibility due to extra bright laser diodes with 50% more power if compared to conventional line lasers.

##Multi-purpose Laser with Crossline, plumb-points and points for 90° stake-out
##High visibility due to red Ultra-power laser diodes
##Large working range due to very wide fan angles
##Self-levelling over wide range
##Operating range of up to 25 m
##With Li-Ion power up to 44 h operation time
##Uninterrupted working with Triple-Power concept
##Smart magnetic adapters for easy positioning
##Can be used with RGR 200 Laser receiver for extended range

In The Box
  • Leica Lino L2P5
  • Quick start guide
  • Rugged Case
  • Li-Ion battery pack incl. charger and plugs
  • Alkaline battery tray
  • Laser target
  • TWIST 360 magnetic multi functional adapter
  • Safety instructions
  • Calibration certificate
  • Warranty card
Specification
  • Laser: 2 lines + 4 points (red)
  • Beam direction: vertical 170°, horizontal / >180°
  • Point direction: up, down, right, left, front (90°/180°)
  • Range: 25 m (82 ft)
  • Range: with receiver 80 m (262 ft)
  • Levelling accuracy: ± 0.002 in/ft or ± 0.04 in @ 16 ft or ± 0.08 in @ 33 ft
  • Horizontal / vertical line accuracy: ± 0.3 mm/m (± 0.004 in/ft)
  • Point accuracy: ± 0.2 mm/m (± 0.002 in/ft)
  • Self-levelling range: ± 4 °
  • Self-levelling time: 3 s
  • Out-of-level warning: yes laser lines blink every 5 s
  • Levelling system: automatic pendulum
  • Pendulum lock: yes
  • Laser type: 635 ± 5 nm, class 2 acc. IEC 60825-1
  • Protection class: IP54 (IEC 60529) dust and splash water
  • Battery type: Lino Li-Ion battery pack, 5200 mAh / 18.7 Wh, or 3 x AA Alkaline
  • Operating time with Li-Ion battery: 26 h (2 beam + 4 points) – 44 h (1 beam + 2 points) continuous
  • Operating time with alkaline battery: 8 h (2 beam + 4 points) – 13 h (1 beam + 2 points) continuous
  • Low power alert: status LED red
  • Automatic shut-off: available
  • Dimensions: (L x W x H) 110 x 60 x 100 mm (4.33 x 2.36 x 3.93 in)
  • Weight with Li-Ion: 530 g (1.17 lbs)
  • Operating temperature: -10… +50 °C (+14… +122 °F)
  • Storage temperature: -25… +70 °C (-13… +158 °F)
  • Temperature alert: status LED blinks red (5Hz)
  • Laser line width at 5 m distance: (<0.08 in)
  • Beam divergence: 1.5 mrad
  • Tripod thread: 1/4'’ (+ 5/8’’ with adapter)
  • Pulse power for receiver: yes, auto
  • Size info box / case: 33.5 cm x 38 cm x 17 cm, 4.0 kg
Customer Review

Reviews

There are no reviews yet.

Be the first to review “Leica Lino L2P5-1 Self-Levelling All-in-one Cross-Line And 4 Points Laser Red Beam”

Your email address will not be published. Required fields are marked *

Shipping & Returns
Shipping Policy:- Our shipping rates are automatically calculated during checkout for orders that we are charging shipping.
Return Policy:- We believe that in order to have the best possible online shopping experience, our customers should be 100% satisfied with their purchase. So, if you're not happy with your purchase for any reason, just go through our easy RMA self-service process. You will receive A RMA Number with return instructions.